$130 PER SIDE

$130 PER SIDE

$ 140 PER SIDE

$ 1,200

OUTER ROCKER PANELS FOR 67- 70 REBEL, AMBASSADOR, MATADOR, 71 - 73 MATADOR,

ROCKER PANELS CAN BE SIMPLE TO MAKE BUT NOT WITH THE DETAILING THAT'S IN OURS AND THE ACCURACY OF THE FIT. IF YOU LOOK CLOSELY YOU'LL SEE THE RETURNS AT EACH END OF THE LOWER IMAGE.



$ 150 PER SIDE

$170 EACH

$ 100 PER SIDE

$240 Per side - middle and inner rocker

14 GAUGE MIDDLE ROCKERThis is the part that holds your car together. If yours are rusted out, We suggest you fine a better body to start with. If you must work with what you have, then we can make these parts but they are expensive. 

LINEAR FLOOR PANSFOR 65 - 66 MARLINS, 67 - 70 REBEL, AMBASSADOR, 71 - 73 MATADOR including 4 door cars though some cutting is necessary by the customer for the centre door post. These partial floor pans are for projects where the floor is rusted the length of the car along the inner rockers. They come in two or more pieces depending on your needs in 10" widths. 

PATCH PANEL FOR 67-69 REBEL FITS BETWEEN DOOR  AND WHEEL WELL.

(DRIVER SIDE SHOWN) BOTH SIDES AVAILABLE

METAL EXTENDS TO 3" ABOVE THE CREASE.

These panels are made of 18 gauge steel of the same quality as your  car's original parts. 

3 PIECE TRUNK PAN, this piece anchors the rear quarter strap. 

THIS PART IS LOCATED after the centre rocker behind the rear quarter at the bottom. A very tricky piece to make and one that rusts out almost completely in most Series 10 cars. Price to be confirmed.

REAR SECTION OF OUTER ROCKER, this section is the base of the door frame. Except they aren't. These are 18 gauge are workable patches to stabilize the door post.

THIS PART IS LOCATED under the rear quarter at the bottom attaching to the visible rocker panel under the door between the door and the rear wheel well.

$170 EACH

TRUNK DROP OFFS FOR 65 - 67 MARLIN, 67- 70 REBEL, AMBASSADOR, 71 73 MATADOR Fits between the door and the rear wheel well opening. 

There were some differences that occurred as time when on so some adjustments may be necessary.

SERIES 10 BODIES WERE WHAT AMC CALLED THEIR SENIOR DIVISION AND THOSE PLATFORMS WERE MADE FROM 1967 TO 1987 AND INCLUDED THE FOLLOWING MODELS: MARLIN, REBEL, AMBASSADOR, MATADOR MOST OF THESE PARTS ARE FOR TWO DOOR CARS. THE FLOORS ARE COMMON TO ALL.  THE TRUNK PAN OF A STATION WAGON WAS COMPLETELY DIFFERENT AND WE DON'T MAKE IT.

MIDDLE ROCKER NOT SHOWN

REAR FLOOR PANS LEFT AND RIGHT

These pans are what you use when your seat platforms are not rusted out next to the inner rockers. 

INNER ROCKERS and SECONDARY MIDDLE ROCKERS made from 18 gauge steel these are the  parts that the edges of your floor pans attach to along the inside of the car at the doors. 

The Secondary Middle Rockers were originally made with a series of holes in them. We learned the holes were for sound deadening that apparently made no difference to the noise level in a car as noisy as a Machine even  in bone stock condition. Besides that we can't reproduce the holes properly without a punch press so no holes. 

$700 PER SIDE INCLUDES BOTH PIECES SHOWN

FRONT FOOT WELL FLOOR PANS FOR 65 - 66 MARLINS, 67 - 70 REBEL, AMBASSADOR, MATADOR, 71 - 73 MATADOR. THESE ARE FOR PROJECTS WHERE THE FLOORS ARE RUSTED FROM HUMP TO DOOR SILL AND FIREWALL TO THE SEAT PLATFORMS.

THESE WILL ALSO FIT LATER MODEL 4 DOOR MATADORS 

REAR FOOT WELL FLOOR PANS (NOT SHOWN) ARE ALSO AVAILABLE.

BODY PANELS - SERIES 10 BODY STYLES - PAGE 2 OF 2 

PATCH PANEL FOR 67-69 REBEL FITS BETWEEN REAR BUMPER AND WHEEL WELL.

(DRIVER SIDE SHOWN) BOTH SIDES AVAILABLE

METAL EXTENDS TO 3" ABOVE THE CREASE.

THESE WILL ALSO WORK ON ALL LATER MODEL 4 DOOR MATADORS 

$225 PER SIDE - FRONT

$225 PER SIDE - REAR

FRONT SECTION OF MIDDLE ROCKER, these parts are the front nosing of the 14 gauge middle rockers. Except they aren't. These are 16 gauge are intended as workable patches for middle  rockers that are only rusted out at that point.. 

THIS PART IS LOCATED underneath the outer rocker behind the front fender at the bottom. A very difficult piece to make out of 14 gauge material as well as very expensive. 

$1,500

FRONT OUTER ROCKER 

THIS PART IS LOCATED FORWARD OF THE DOOR and under the bottom of the front fender.